<source>Files that have been found by user query</source>
<target>Files that have been found by user query</target>
</trans-unit>
<trans-unit id="sorting_criterion_caption">
<source>Sort</source>
<target>Sort</target>
</trans-unit>
<trans-unit id="sort_menu_caption">
<source>by <x id="1"/> <x id="2"/></source>
<target>by <x id="1"/> <x id="2"/></target>
</trans-unit>
<trans-unit id="sort_folder_caption">
<source>For folder</source>
<target>For folder</target>
</trans-unit>
<trans-unit id="ascending_caption">
<source>ascending</source>
<target>ascending</target>
</trans-unit>
<trans-unit id="descending_caption">
<source>descending</source>
<target>descending</target>
</trans-unit>
<trans-unit id="sort_default_item">
<source>Unsorted</source>
<target>Unsorted</target>
</trans-unit>
<trans-unit id="sort_name_item">
<source>Name</source>
<target>Name</target>
</trans-unit>
<trans-unit id="sort_size_item">
<source>Size</source>
<target>Size</target>
</trans-unit>
<trans-unit id="sort_time_item">
<source>Time</source>
<target>Time</target>
</trans-unit>
<trans-unit id="sort_winner_item">
<source>Sync direction</source>
<target>Sync direction</target>
</trans-unit>
<trans-unit id="tooltip_sort_by_name">
<source>Sort by name</source>
<target>Sort by name</target>
</trans-unit>
<trans-unit id="tooltip_sort_by_size">
<source>Sort by size</source>
<target>Sort by size</target>
</trans-unit>
<trans-unit id="tooltip_sort_by_time">
<source>Sort by time</source>
<target>Sort by time</target>
</trans-unit>
<trans-unit id="tooltip_sort_by_winner">
<source>Sort by direction</source>
<target>Sort by direction</target>
</trans-unit>
<trans-unit id="on_begin_idle_caption">
<source>The synchronizer goes into the idle state</source>
<target>The synchronizer goes into the idle state</target>
</trans-unit>
<trans-unit id="on_end_idle_caption">
<source>The synchronizer goes out of the idle state</source>
<target>The synchronizer goes out of the idle state</target>
</trans-unit>
<trans-unit id="using_idle_scheduler">
<source>When computer is idle</source>
<target>When computer is idle</target>
</trans-unit>
<trans-unit id="using_idle_des_scheduler">
<source>Synchronization will be performed each time user stops keyboard or mouse activity for the specified period of time.</source>
<target>Synchronization will be performed each time user stops keyboard or mouse activity for the specified period of time.</target>
</trans-unit>
<trans-unit id="using_idle_scheduler_delay">
<source>Delay:</source>
<target>Delay:</target>
</trans-unit>
<trans-unit id="RemovableDrive">
<source>Removable drive</source>
<target>Removable drive</target>
</trans-unit>
<trans-unit id="RemovePortableDrive">
<source>The device with synchronizer has been removed. Please plug the device to continue the work or press the Cancel button to finish the synchronization.</source>
<target>The device with synchronizer has been removed. Please plug the device to continue the work or press the Cancel button to finish the synchronization.</target>
</trans-unit>
<trans-unit id="Pr_Bar_Analyzing">
<source>Analyzing:</source>
<target>Analyzing:</target>
</trans-unit>
<trans-unit id="Pr_Bar_A_Is_Done">
<source>Analysis done</source>
<target>Analysis done</target>
</trans-unit>
<trans-unit id="Pr_Bar_Synchronizing">
<source>Synchronizing:</source>
<target>Synchronizing:</target>
</trans-unit>
<trans-unit id="Auto_Sync_Is_On">
<source>Automatic synchronization is on</source>
<target>Automatic synchronization is on</target>
</trans-unit>
<trans-unit id="Auto_Sync_Is_Off">
<source>Automatic synchronization is off</source>
<target>Automatic synchronization is off</target>
</trans-unit>
<trans-unit id="tooltip_Auto_Sync_Is">
<source>Automatic synchronization status. Use options window to start synchronization on certain conditions automatically</source>
<target>Automatic synchronization status. Use options window to start synchronization on certain conditions automatically</target>
</trans-unit>
<trans-unit id="COMMAND_PAUSE">
<source>Pause</source>
<target>Pause</target>
</trans-unit>
<trans-unit id="COMMAND_STOP">
<source>Stop</source>
<target>Stop</target>
</trans-unit>
<trans-unit id="COMMAND_ANALYZE">
<source>Analyze</source>
<target>Analyze</target>
</trans-unit>
<trans-unit id="COMMAND_SYNCHRONIZE">
<source>Synchronize</source>
<target>Synchronize</target>
</trans-unit>
<trans-unit id="COMMAND_RETRY">
<source>Retry</source>
<target>Retry</target>
</trans-unit>
<trans-unit id="COMMAND_AUTORETRY">
<source>Auto Retry</source>
<target>Auto Retry</target>
</trans-unit>
<trans-unit id="COMMAND_IGNORE">
<source>Ignore</source>
<target>Ignore</target>
</trans-unit>
<trans-unit id="COMMAND_IGNORE_ALL">
<source>Ignore all discovered warnings and continue</source>
<target>Ignore all discovered warnings and continue</target>
</trans-unit>
<trans-unit id="COMMAND_CANCEL">
<source>Cancel</source>
<target>Cancel</target>
</trans-unit>
<trans-unit id="COMMAND_SKIP">
<source>Skip</source>
<target>Skip</target>
</trans-unit>
<trans-unit id="COMMAND_SKIP_ALL">
<source>Skip all discovered errors and continue</source>
<target>Skip all discovered errors and continue</target>
<source>Error while copying "<x id="1"/>" to "<x id="2"/>" using intermediate "<x id="3"/>"</source>
<target>Error while copying "<x id="1"/>" to "<x id="2"/>" using intermediate "<x id="3"/>"</target>
</trans-unit>
<trans-unit id="msg_err_box">
<source>A detailed error report has been created and pasted to the clipboard. You can send it to help us improve the file synchronizer application. We will treat this report as confidential and anonymous.</source>
<target>A detailed error report has been created and pasted to the clipboard. You can send it to help us improve the file synchronizer application. We will treat this report as confidential and anonymous.</target>
</trans-unit>
<trans-unit id="msg_err_box_yes_no">
<source>Do you want to send the error report now? (Internet connection is required)</source>
<target>Do you want to send the error report now? (Internet connection is required)</target>
</trans-unit>
<trans-unit id="msg_err_reason_path_too_long">
<source><x id="1"/>, possible reason: file path is too long.</source>
<target><x id="1"/>, possible reason: file path is too long.</target>
</trans-unit>
<trans-unit id="msg_err_file_read">
<source>file read error</source>
<target>file read error</target>
</trans-unit>
<trans-unit id="msg_err_file_write">
<source>file write error</source>
<target>file write error</target>
</trans-unit>
<trans-unit id="msg_err_lic_trial_warn">
<source>The free trial period will be over soon.
Please consider obtaining the Pro version of <x id="1"/>.
</source>
<target>The free trial period will be over soon.
Please consider obtaining the Pro version of <x id="1"/>.
</target>
</trans-unit>
<trans-unit id="msg_err_lic_trial_over">
<source>The free trial period is over.
Please buy the Pro version or uninstall <x id="1"/>.
Note: changing the system time may result in improper file synchronization.
</source>
<target>The free trial period is over.
Please buy the Pro version or uninstall <x id="1"/>.
Note: changing the system time may result in improper file synchronization.
</target>
</trans-unit>
<trans-unit id="msg_err_lic_warn">
<source>Measurements indicate usage in excess of typical personal requirements.
Please consider obtaining the Pro version of <x id="1"/>.
</source>
<target>Measurements indicate usage in excess of typical personal requirements.
Please consider obtaining the Pro version of <x id="1"/>.
</target>
</trans-unit>
<trans-unit id="msg_err_lic_warn_serious">
<source>This is your final reminder. Measurements indicate usage in excess of typical personal requirements. <x id="1"/> may stop working unless you obtain a Pro license key.</source>
<target>This is your final reminder. Measurements indicate usage in excess of typical personal requirements. <x id="1"/> may stop working unless you obtain a Pro license key.</target>
</trans-unit>
<trans-unit id="msg_err_lic_warn_stop">
<source>Measurements indicate usage in excess of typical personal requirements.
Please buy <x id="1"/> Pro or enter the license key if you already have.
You will be able to continue to use the free version when usage statistics for the past 30 days return to moderate levels.
Note: changing the system time may result in improper file synchronization.</source>
<target>Measurements indicate usage in excess of typical personal requirements.
Please buy <x id="1"/> Pro or enter the license key if you already have.
You will be able to continue to use the free version when usage statistics for the past 30 days return to moderate levels.
Note: changing the system time may result in improper file synchronization.</target>
</trans-unit>
<trans-unit id="popup_menu_more">
<source>More</source>
<target>More</target>
</trans-unit>
<trans-unit id="popup_menu_select">
<source>Select Correct File</source>
<target>Select Correct File</target>
</trans-unit>
<trans-unit id="popup_select_direction">
<source>Select Synchronization Direction</source>
<target>Select Synchronization Direction</target>
</trans-unit>
<trans-unit id="popup_change_link">
<source>Change</source>
<target>Change</target>
</trans-unit>
<trans-unit id="str_created">
<source>Created</source>
<target>Created</target>
</trans-unit>
<trans-unit id="str_deleted">
<source>Deleted</source>
<target>Deleted</target>
</trans-unit>
<trans-unit id="str_modified">
<source>Updated</source>
<target>Updated</target>
</trans-unit>
<trans-unit id="str_not_exist">
<source>Does not exist</source>
<target>Does not exist</target>
</trans-unit>
<trans-unit id="str_not_available">
<source>Is not available</source>
<target>Is not available</target>
</trans-unit>
<trans-unit id="str_excluded">
<source>Excluded by filter</source>
<target>Excluded by filter</target>
</trans-unit>
<trans-unit id="str_link_to_important_message">
<source>You have a message</source>
<target>You have a message</target>
</trans-unit>
<trans-unit id="str_folder">
<source>Folder</source>
<target>Folder</target>
</trans-unit>
<trans-unit id="str_file">
<source>File</source>
<target>File</target>
</trans-unit>
<trans-unit id="log_created">
<source>Folder created: "<x id="1"/>"</source>
<target>Folder created: "<x id="1"/>"</target>
</trans-unit>
<trans-unit id="log_deleted">
<source>File or folder deleted: "<x id="1"/>"</source>
<target>File or folder deleted: "<x id="1"/>"</target>
</trans-unit>
<trans-unit id="log_copied">
<source>File copied: "<x id="1"/>" to "<x id="2"/>"</source>
<target>File copied: "<x id="1"/>" to "<x id="2"/>"</target>
</trans-unit>
<trans-unit id="tooltip_goto_important_message">
<source>Click to see the important message</source>
<target>Click to see the important message</target>
</trans-unit>
<trans-unit id="tooltip_open_the_item">
<source>Click to open</source>
<target>Click to open</target>
</trans-unit>
<trans-unit id="tooltip_open_the_rootfolder">
<source>Click to open the synchronization root</source>
<target>Click to open the synchronization root</target>
</trans-unit>
<trans-unit id="tooltip_open_the_folder">
<source>Click to open the folder</source>
<target>Click to open the folder</target>
</trans-unit>
<trans-unit id="tooltip_open_the_file">
<source>Click to open the file</source>
<target>Click to open the file</target>
</trans-unit>
<trans-unit id="tooltip_more_alt">
<source>More alternatives</source>
<target>More alternatives</target>
</trans-unit>
<trans-unit id="tooltip_hide_alt">
<source>Hide alternatives</source>
<target>Hide alternatives</target>
</trans-unit>
<trans-unit id="tooltip_first_page">
<source>Scroll to first page</source>
<target>Scroll to first page</target>
</trans-unit>
<trans-unit id="tooltip_next_page">
<source>Scroll to next page</source>
<target>Scroll to next page</target>
</trans-unit>
<trans-unit id="tooltip_prev_page">
<source>Scroll to previous page</source>
<target>Scroll to previous page</target>
</trans-unit>
<trans-unit id="tooltip_last_page">
<source>Scroll to last page</source>
<target>Scroll to last page</target>
</trans-unit>
<trans-unit id="tooltip_prev_message">
<source>Scroll to previous message</source>
<target>Scroll to previous message</target>
</trans-unit>
<trans-unit id="tooltip_next_message">
<source>Scroll to next message</source>
<target>Scroll to next message</target>
</trans-unit>
<trans-unit id="tooltip_sync_board_left">
<source>Insert synchronization path here</source>
<target>Insert synchronization path here</target>
</trans-unit>
<trans-unit id="tooltip_sync_board_right">
<source>Insert synchronization path here</source>
<target>Insert synchronization path here</target>
</trans-unit>
<trans-unit id="tooltip_FSP_Ok">
<source>Apply changes</source>
<target>Apply changes</target>
</trans-unit>
<trans-unit id="tooltip_FSP_Cancel">
<source>Cancel changes</source>
<target>Cancel changes</target>
</trans-unit>
<trans-unit id="tooltip_FSP_Browse">
<source>Browse for folder</source>
<target>Browse for folder</target>
</trans-unit>
<trans-unit id="tooltip_FSP_Open">
<source>Open this folder in Windows Explorer</source>
<target>Open this folder in Windows Explorer</target>
</trans-unit>
<trans-unit id="tooltip_All_collection">
<source>All synchronization items</source>
<target>All synchronization items</target>
</trans-unit>
<trans-unit id="tooltip_Unchanged_collection">
<source>Items that have not been changed since the last synchronization</source>
<target>Items that have not been changed since the last synchronization</target>
</trans-unit>
<trans-unit id="tooltip_Changed_collection">
<source>Items that have been changed since the last synchronization</source>
<target>Items that have been changed since the last synchronization</target>
</trans-unit>
<trans-unit id="tooltip_New_collection">
<source>Items that have been created since the last synchronization</source>
<target>Items that have been created since the last synchronization</target>
</trans-unit>
<trans-unit id="tooltip_Deleted_collection">
<source>Items that have been deleted since the last synchronization</source>
<target>Items that have been deleted since the last synchronization</target>
</trans-unit>
<trans-unit id="tooltip_Excluded_collection">
<source>Items that are excluded from synchronization in job filter settings</source>
<target>Items that are excluded from synchronization in job filter settings</target>
<source>Click here to see important message(s)</source>
<target>Click here to see important message(s)</target>
</trans-unit>
<trans-unit id="hint_Banner_on">
<source>Click to hide the logo</source>
<target>Click to hide the logo</target>
</trans-unit>
<trans-unit id="hint_Banner_off">
<source>Click to show the logo</source>
<target>Click to show the logo</target>
</trans-unit>
<trans-unit id="hint_Winner_Delete_All">
<source>If checked the file will be deleted from all sides</source>
<target>If checked the file will be deleted from all sides</target>
</trans-unit>
<trans-unit id="hint_Winner_Nothing">
<source>If checked nothing will be done for this file</source>
<target>If checked nothing will be done for this file</target>
</trans-unit>
<trans-unit id="hint_Winner">
<source>If checked this sample of file will define the action</source>
<target>If checked this sample of file will define the action</target>
</trans-unit>
<trans-unit id="wnd_select_folder">
<source>Select Folder</source>
<target>Select Folder</target>
</trans-unit>
<trans-unit id="new_association_name">
<source>New Job</source>
<target>New Job</target>
</trans-unit>
<trans-unit id="default_profile_name">
<source>Default Profile</source>
<target>Default Profile</target>
</trans-unit>
<trans-unit id="metric_hours">
<source>hours</source>
<target>hours</target>
</trans-unit>
<trans-unit id="metric_bytes">
<source>bytes</source>
<target>bytes</target>
</trans-unit>
<trans-unit id="metric_Kbytes">
<source>Kb</source>
<target>Kb</target>
</trans-unit>
<trans-unit id="metric_Mbytes">
<source>Mb</source>
<target>Mb</target>
</trans-unit>
<trans-unit id="m_DaFilesProcessed">
<source>Files processed</source>
<target>Files processed</target>
</trans-unit>
<trans-unit id="m_DaFilesCopied">
<source>Files copied</source>
<target>Files copied</target>
</trans-unit>
<trans-unit id="m_DaBytesProcessed">
<source>Bytes processed</source>
<target>Bytes processed</target>
</trans-unit>
<trans-unit id="m_DaBytesCopied">
<source>Bytes copied</source>
<target>Bytes copied</target>
</trans-unit>
<trans-unit id="MM_TrafficSaved">
<source>Estimated traffic saved</source>
<target>Estimated traffic saved</target>
</trans-unit>
<trans-unit id="MM_TimeSaved">
<source>Estimated time saved</source>
<target>Estimated time saved</target>
</trans-unit>
<trans-unit id="option_global">
<source>Application</source>
<target>Application</target>
</trans-unit>
<trans-unit id="option_language">
<source>Language:</source>
<target>Language:</target>
</trans-unit>
<trans-unit id="o_des_language">
<source>Select the language to use for your interaction with the application.
This selection is applied immediately, without the need to restart the application.
Some text may not be available in a particular language.
Any untranslated text appears in English.
If your language is not listed, or if you see errors in its translation and you want to help by adding a translation for your language, or by providing corrections for it, please see how you can contribute by visiting our web site and clicking the "Translate" link.</source>
<target>Select the language to use for your interaction with the application.
This selection is applied immediately, without the need to restart the application.
Some text may not be available in a particular language.
Any untranslated text appears in English.
If your language is not listed, or if you see errors in its translation and you want to help by adding a translation for your language, or by providing corrections for it, please see how you can contribute by visiting our web site and clicking the "Translate" link.</target>
</trans-unit>
<trans-unit id="option_memorize_window_position">
<source>Memorize window position</source>
<target>Memorize window position</target>
</trans-unit>
<trans-unit id="o_des_memorize_window_position">
<source>If checked, window position and
size will be the same next time you start the application</source>
<target>If checked, window position and
size will be the same next time you start the application</target>
</trans-unit>
<trans-unit id="option_enable_auto_update">
<source>Automatically check for software updates</source>
<target>Automatically check for software updates</target>
</trans-unit>
<trans-unit id="o_des_enable_auto_update">
<source>If you check this option the application connects automatically to our web server about once a week to check if software updates are available.
If an update is available, you will have the option to install the new version or to continue using the current version.
An Internet connection is required for this option to operate.
No personal information is sent to the server.
See the End User License Agreement for details.</source>
<target>If you check this option the application connects automatically to our web server about once a week to check if software updates are available.
If an update is available, you will have the option to install the new version or to continue using the current version.
An Internet connection is required for this option to operate.
No personal information is sent to the server.
See the End User License Agreement for details.</target>
</trans-unit>
<trans-unit id="option_start_on_user_login">
<source>Start application system tray icon on system start-up</source>
<target>Start application system tray icon on system start-up</target>
</trans-unit>
<trans-unit id="o_des_start_on_user_login">
<source>If you check this option the application starts automatically when you log on.
The application is represented by a minimized icon in the task bar.
Use this option when automatic synchronization is configured.</source>
<target>If you check this option the application starts automatically when you log on.
The application is represented by a minimized icon in the task bar.
Use this option when automatic synchronization is configured.</target>
</trans-unit>
<trans-unit id="option_default_browser">
<source>Open links in default browser</source>
<target>Open links in default browser</target>
</trans-unit>
<trans-unit id="o_des_option_default_browser">
<source>If the option is checked, the application uses browser set by default in system and Internet Explorer otherwise.</source>
<target>If the option is checked, the application uses browser set by default in system and Internet Explorer otherwise.</target>
</trans-unit>
<trans-unit id="items_per_page">
<source>Number of files per page displayed in each group:</source>
<target>Number of files per page displayed in each group:</target>
</trans-unit>
<trans-unit id="presentation_page">
<source>User interface</source>
<target>User interface</target>
</trans-unit>
<trans-unit id="o_des_presentation_page">
<source>Configure user interface parameters</source>
<target>Configure user interface parameters</target>
</trans-unit>
<trans-unit id="success_balloon">
<source>Show balloon when synchronization finished successfully</source>
<target>Show balloon when synchronization finished successfully</target>
</trans-unit>
<trans-unit id="o_des_success_balloon">
<source>A system tray balloon will appear to inform you that background synchronization finishes successfully.</source>
<target>A system tray balloon will appear to inform you that background synchronization finishes successfully.</target>
</trans-unit>
<trans-unit id="failed_balloon">
<source>Show balloon when synchronization failed</source>
<target>Show balloon when synchronization failed</target>
</trans-unit>
<trans-unit id="o_des_failed_balloon">
<source>A system tray balloon will appear on any error during background synchronization process.</source>
<target>A system tray balloon will appear on any error during background synchronization process.</target>
</trans-unit>
<trans-unit id="option_full_file_name">
<source>Display full file name</source>
<target>Display full file name</target>
</trans-unit>
<trans-unit id="o_des_full_file_name">
<source>Full file and folder names will be displayed. Uncheck this flag to save space in the analysis result area.</source>
<target>Full file and folder names will be displayed. Uncheck this flag to save space in the analysis result area.</target>
</trans-unit>
<trans-unit id="option_banner_show">
<source>Show logo in the profile window</source>
<target>Show logo in the profile window</target>
</trans-unit>
<trans-unit id="o_des_banner_show">
<source>If the option is checked, the program logo is displayed in the profile window.</source>
<target>If the option is checked, the program logo is displayed in the profile window.</target>
</trans-unit>
<trans-unit id="option_skin">
<source>Skin:</source>
<target>Skin:</target>
</trans-unit>
<trans-unit id="o_des_skin">
<source>Select the skin to use in the application's user interface.
This selection is applied immediately, without the need to restart the application.</source>
<target>Select the skin to use in the application's user interface.
This selection is applied immediately, without the need to restart the application.</target>
</trans-unit>
<trans-unit id="event_page">
<source>Event log</source>
<target>Event log</target>
</trans-unit>
<trans-unit id="o_des_event_page">
<source>Configure event log parameters</source>
<target>Configure event log parameters</target>
</trans-unit>
<trans-unit id="option_log_output">
<source>Log output</source>
<target>Log output</target>
</trans-unit>
<trans-unit id="o_des_option_log_output">
<source>Specify where the log messages should be streamed to</source>
<target>Specify where the log messages should be streamed to</target>
</trans-unit>
<trans-unit id="option_visible_events_count">
<source>Items in log window: </source>
<target>Items in log window: </target>
</trans-unit>
<trans-unit id="option_save_events">
<source>Save log in file</source>
<target>Save log in file</target>
</trans-unit>
<trans-unit id="o_des_option_save_events">
<source>If this option is checked all log messages will be saved in the following file: [Current User Application Data]\Sync App Settings\_SYNCAPP\default.log. Specify maximum size of the log file in megabytes. Larger file will be truncated.</source>
<target>If this option is checked all log messages will be saved in the following file: [Current User Application Data]\Sync App Settings\_SYNCAPP\default.log. Specify maximum size of the log file in megabytes. Larger file will be truncated.</target>
</trans-unit>
<trans-unit id="option_file_size_events">
<source>Max log file size, Mb: </source>
<target>Max log file size, Mb: </target>
</trans-unit>
<trans-unit id="option_severity_events">
<source>Log conciseness</source>
<target>Log conciseness</target>
</trans-unit>
<trans-unit id="o_des_option_severity_events">
<source>Select how important a message should be to be displayed in the log window.</source>
<target>Select how important a message should be to be displayed in the log window.</target>
</trans-unit>
<trans-unit id="option_severity_level_1">
<source>Verbose</source>
<target>Verbose</target>
</trans-unit>
<trans-unit id="option_severity_level_2">
<source>Brief</source>
<target>Brief</target>
</trans-unit>
<trans-unit id="option_severity_level_3">
<source>Warnings and Errors only</source>
<target>Warnings and Errors only</target>
</trans-unit>
<trans-unit id="option_severity_level_4">
<source>Errors only</source>
<target>Errors only</target>
</trans-unit>
<trans-unit id="option_show_events">
<source>Show event log window</source>
<target>Show event log window</target>
</trans-unit>
<trans-unit id="o_des_option_show_events">
<source>Show event log window at the bottom of the profile window. Select maximum number of messages displayed in the log window. When this number is exceeded the older messages will be truncated.</source>
<target>Show event log window at the bottom of the profile window. Select maximum number of messages displayed in the log window. When this number is exceeded the older messages will be truncated.</target>
</trans-unit>
<trans-unit id="option_profiler">
<source>Default Profile</source>
<target>Default Profile</target>
</trans-unit>
<trans-unit id="option_general">
<source>General</source>
<target>General</target>
</trans-unit>
<trans-unit id="o_des_option_general">
<source>Click to set general properties</source>
<target>Click to set general properties</target>
</trans-unit>
<trans-unit id="option_association">
<source>Job</source>
<target>Job</target>
</trans-unit>
<trans-unit id="o_des_association">
<source>Click to set the job properties</source>
<target>Click to set the job properties</target>
</trans-unit>
<trans-unit id="option_scheduler">
<source>Automatic Synchronization</source>
<target>Automatic Synchronization</target>
</trans-unit>
<trans-unit id="o_des_scheduler">
<source>Select condition(s) for starting synchronization automatically.</source>
<target>Select condition(s) for starting synchronization automatically.</target>
</trans-unit>
<trans-unit id="o_des_form_scheduler">
<source>Select condition(s) for starting synchronization.
The application must be running in order to start synchronization automatically (unless the "Use Windows Task Scheduler" option is enabled).
Automatic synchronization jobs are not started when a manual analyze/synchronize session is in progress.</source>
<target>Select the condition(s) for starting synchronization.
The application must be running in order to start synchronization automatically (unless the "Use Windows Task Scheduler" option is enabled).
Automatic synchronization jobs are not started when a manual analyze/synchronize session is in progress.</target>
</trans-unit>
<trans-unit id="option_caption_scheduler">
<source>Set conditions to start synchronization automatically</source>
<target>Set conditions to start synchronization automatically</target>
</trans-unit>
<trans-unit id="drive_connected_scheduler">
<source>When removable device is connected</source>
<target>When removable device is connected</target>
</trans-unit>
<trans-unit id="drive_connected_des_scheduler">
<source>Use this option when one or more of the sync folders in this job are on a removable USB device (USB drive, digital camera, MP3 player, flash card reader, etc.).
Synchronization is performed automatically - just insert the device into a USB port.
No other interaction is required!
Note: this option does not detect when network drives are connected.</source>
<target>Use this option when one or more of the sync folders in this job are on a removable USB device (USB drive, digital camera, MP3 player, flash card reader, etc.).
Synchronization is performed automatically - just insert the device into a USB port.
No other interaction is required!
Note: this option does not detect when network drives are connected.</target>
<source>The application automatically checks for file changes at the indicated frequency.
The application analyzes the folders defined for the synchronization job to determine how they have changed.
Detected changes are automatically propagated to the partner synchronization folder(s).
To minimize the impact of the application on system performance choose the largest time interval possible, consistent with your requirements.</source>
<target>The application automatically checks for file changes at the indicated frequency.
The application analyzes the folders defined for the synchronization job to determine how they have changed.
Detected changes are automatically propagated to the partner synchronization folder(s).
To minimize the impact of the application on system performance choose the largest time interval possible, consistent with your requirements.</target>
</trans-unit>
<trans-unit id="1_min">
<source>minute</source>
<target>minute</target>
</trans-unit>
<trans-unit id="2_min">
<source>2 minutes</source>
<target>2 minutes</target>
</trans-unit>
<trans-unit id="3_min">
<source>3 minutes</source>
<target>3 minutes</target>
</trans-unit>
<trans-unit id="5_min">
<source>5 minutes</source>
<target>5 minutes</target>
</trans-unit>
<trans-unit id="10_min">
<source>10 minutes</source>
<target>10 minutes</target>
</trans-unit>
<trans-unit id="15_min">
<source>15 minutes</source>
<target>15 minutes</target>
</trans-unit>
<trans-unit id="20_min">
<source>20 minutes</source>
<target>20 minutes</target>
</trans-unit>
<trans-unit id="25_min">
<source>25 minutes</source>
<target>25 minutes</target>
</trans-unit>
<trans-unit id="30_min">
<source>30 minutes</source>
<target>30 minutes</target>
</trans-unit>
<trans-unit id="45_min">
<source>45 minutes</source>
<target>45 minutes</target>
</trans-unit>
<trans-unit id="hour">
<source>hour</source>
<target>hour</target>
</trans-unit>
<trans-unit id="3_hour">
<source>3 hours</source>
<target>3 hours</target>
</trans-unit>
<trans-unit id="6_hour">
<source>6 hours</source>
<target>6 hours</target>
</trans-unit>
<trans-unit id="day">
<source>day</source>
<target>day</target>
</trans-unit>
<trans-unit id="week">
<source>week</source>
<target>week</target>
</trans-unit>
<trans-unit id="month">
<source>month</source>
<target>month</target>
</trans-unit>
<trans-unit id="using_WTS_scheduler">
<source>Use Windows Task Scheduler</source>
<target>Use Windows Task Scheduler</target>
</trans-unit>
<trans-unit id="using_WTS_des_scheduler">
<source>The Windows Task Scheduler provides highly customizable scheduling options by means of a dialog that lets you set up daily, weekly, and monthly synchronization jobs and much more.
Press the "Configure" button to launch a dialog that lets you add a new scheduled task and define the parameters for that task.
The Windows Task Scheduler runs the application at the specified time as a separate process.
This means that you don't need to keep the application running constantly in order benefit from automatic synchronization.
Note: due to operating system security settings, this option may not work on systems for which the user log on password is not defined.</source>
<target>The Windows Task Scheduler provides highly customizable scheduling options by means of a dialog that lets you set up daily, weekly, and monthly synchronization jobs and much more.
Press the "Configure" button to launch a dialog that lets you add a new scheduled task and define the parameters for that task.
The Windows Task Scheduler runs the application at the specified time as a separate process.
This means that you don't need to keep the application running constantly in order benefit from automatic synchronization.
Note: due to operating system security settings, this option may not work on systems for which the user log on password is not defined.</target>
</trans-unit>
<trans-unit id="WTS_button_scheduler">
<source>Configure</source>
<target>Configure</target>
</trans-unit>
<trans-unit id="option_filters">
<source>Inclusion and Exclusion Filters</source>
<target>Inclusion and Exclusion Filters</target>
</trans-unit>
<trans-unit id="o_des_page_filters">
<source>Choose files and folders to be synchronized.</source>
<target>Choose files and folders to be synchronized.</target>
</trans-unit>
<trans-unit id="o_des_filters">
<source>Choose files and folders to be synchronized. In order to be synchronized a file must
match the inclusion filters and do not match the exclusion filters.</source>
<target>Choose files and folders to be synchronized. In order to be synchronized a file must
match the inclusion filters and do not match the exclusion filters.</target>
</trans-unit>
<trans-unit id="option_permition_filter">
<source>Inclusion Filters</source>
<target>Inclusion Filters</target>
</trans-unit>
<trans-unit id="o_des_permition_filter">
<source>Only files that match at least one of these filters are included in synchronization.
If the inclusion filter list is empty, all files are included.</source>
<target>Only files that match at least one of these filters are included in synchronization.
If the inclusion filter list is empty, all files are included.</target>
</trans-unit>
<trans-unit id="option_exclusion_filter">
<source>Exclusion Filters</source>
<target>Exclusion Filters</target>
</trans-unit>
<trans-unit id="o_des_exclusion_filter">
<source>Files and folders that match at least one of these filters are excluded from synchronization.</source>
<target>Files and folders that match at least one of these filters are excluded from synchronization.</target>
</trans-unit>
<trans-unit id="option_file_filter">
<source>File Name Filter</source>
<target>File Name Filter</target>
</trans-unit>
<trans-unit id="o_des_file_filter">
<source>Select the file name or a file mask for this filter.
File paths you specify are relative to the synchronization folder root.
Examples: "\file1.doc" - file1.doc in the root of the synchronization folder,
"*.mp3" - all MP3 files,
"\My Pictures\Summer 2005" - the entire content of the folder \My Pictures\Summer 2005,
"\*\*" - all files in subfolders.
Note: do not use complete (absolute) file/folder paths - specifications must be relative to the root of the synchronization folder.</source>
<target>Select the file name or a file mask for this filter.
File paths you specify are relative to the synchronization folder root.
Examples: "\file1.doc" - file1.doc in the root of the synchronization folder,
"*.mp3" - all MP3 files,
"\My Pictures\Summer 2005" - the entire content of the folder \My Pictures\Summer 2005,
"\*\*" - all files in subfolders.
Note: do not use complete (absolute) file/folder paths - specifications must be relative to the root of the synchronization folder.</target>
</trans-unit>
<trans-unit id="option_attribute_filter">
<source>File Attribute Filter</source>
<target>File Attribute Filter</target>
</trans-unit>
<trans-unit id="o_des_attribute_filter">
<source>Select specific file attributes for this filter.
Only files and folders that have the specified attributes match the filter specification.</source>
<target>Select specific file attributes for this filter.
Only files and folders that have the specified attributes match the filter specification.</target>
</trans-unit>
<trans-unit id="option_read_only_attribute">
<source>Read only</source>
<target>Read only</target>
</trans-unit>
<trans-unit id="option_archive_attribute">
<source>Archive</source>
<target>Archive</target>
</trans-unit>
<trans-unit id="option_hidden_attribute">
<source>Hidden</source>
<target>Hidden</target>
</trans-unit>
<trans-unit id="option_system_attribute">
<source>System</source>
<target>System</target>
</trans-unit>
<trans-unit id="option_compressed_attribute">
<source>Compressed</source>
<target>Compressed</target>
</trans-unit>
<trans-unit id="option_encrypted_attribute">
<source>Encrypted</source>
<target>Encrypted</target>
</trans-unit>
<trans-unit id="option_attribute_switch_any">
<source>Any</source>
<target>Any</target>
</trans-unit>
<trans-unit id="option_attribute_switch_on">
<source>Set</source>
<target>Set</target>
</trans-unit>
<trans-unit id="option_attribute_switch_off">
<source>Unset</source>
<target>Unset</target>
</trans-unit>
<trans-unit id="option_apply_to">
<source>Apply to</source>
<target>Apply to</target>
</trans-unit>
<trans-unit id="option_status">
<source>File status</source>
<target>File status</target>
</trans-unit>
<trans-unit id="o_des_option_status">
<source>
Select file status as assigned by the synchronization algorithm. For instance, if
you check "Deleted" all deleted files and folders will match the filter. </source>
<target>
Select file status as assigned by the synchronization algorithm. For instance, if
you check "Deleted" all deleted files and folders will match the filter. </target>
</trans-unit>
<trans-unit id="option_modification_time">
<source>File modification time</source>
<target>File modification time</target>
</trans-unit>
<trans-unit id="o_des_modification_time">
<source>Select file modification time range.</source>
<target>Select file modification time range.</target>
</trans-unit>
<trans-unit id="option_file_size">
<source>File size</source>
<target>File size</target>
</trans-unit>
<trans-unit id="o_des_file_size">
<source>Select file size range</source>
<target>Select file size range</target>
</trans-unit>
<trans-unit id="option_files_and_folders">
<source>Files and folders</source>
<target>Files and folders</target>
</trans-unit>
<trans-unit id="o_des_files_and_folders">
<source />
<target />
</trans-unit>
<trans-unit id="option_files_only">
<source>Files only </source>
<target>Files only </target>
</trans-unit>
<trans-unit id="o_des_files_only">
<source />
<target />
</trans-unit>
<trans-unit id="option_folders_only">
<source>Folders only</source>
<target>Folders only</target>
</trans-unit>
<trans-unit id="o_des_folders_only">
<source />
<target />
</trans-unit>
<trans-unit id="option_folders_and_mask">
<source>Files in subfolders</source>
<target>Files in subfolders</target>
</trans-unit>
<trans-unit id="o_des_folders_and_mask">
<source />
<target />
</trans-unit>
<trans-unit id="option_new_status">
<source>New</source>
<target>New</target>
</trans-unit>
<trans-unit id="option_changed_status">
<source>Changed</source>
<target>Changed</target>
</trans-unit>
<trans-unit id="option_deleted_status">
<source>Deleted</source>
<target>Deleted</target>
</trans-unit>
<trans-unit id="option_no_status">
<source>Nothing matches the status specification(s)</source>
<target>Nothing matches the status specification(s)</target>
<source>This warning appears if more than 50% of files were changed since the last synchronization.</source>
<target>This warning appears if more than 50% of files were changed since the last synchronization.</target>
</trans-unit>
<trans-unit id="option_other_warning">
<source>Other warnings</source>
<target>Other warnings</target>
</trans-unit>
<trans-unit id="o_des_other_warning">
<source>All warnings not listed above.</source>
<target>All warnings not listed above.</target>
</trans-unit>
<trans-unit id="option_retry_list">
<source>Automatic Retry</source>
<target>Automatic Retry</target>
</trans-unit>
<trans-unit id="o_des_retry_list">
<source>Automatic retry settings.</source>
<target>Automatic retry settings.</target>
</trans-unit>
<trans-unit id="option_retry_quantity">
<source>Maximum number of automatic retry attempts</source>
<target>Maximum number of automatic retry attempts</target>
</trans-unit>
<trans-unit id="o_des_retry_quantity">
<source>Quantity of "Retry" attempts that application will undertake to repeat the action which was the cause of error.</source>
<target>Quantity of "Retry" attempts that application will undertake to repeat the action which was the cause of error.</target>
</trans-unit>
<trans-unit id="option_wait_before_retry">
<source>Delay in seconds before automatic retry</source>
<target>Delay in seconds before automatic retry</target>
</trans-unit>
<trans-unit id="o_des_wait_before_retry">
<source>Period of time before next retry attempt.</source>
<target>Period of time before next retry attempt.</target>
</trans-unit>
<trans-unit id="auto_retry_caption">
<source>Automatic retry after <x id="1"/> seconds</source>
<target>Automatic retry after <x id="1"/> seconds</target>
</trans-unit>
<trans-unit id="check_remove_files">
<source>Propagate deletions</source>
<target>Propagate deletions</target>
</trans-unit>
<trans-unit id="hint_check_remove_files">
<source>Files and folders deleted on the source side are also deleted on the target side after synchronization. You should perform complete synchronization at least once to make this option work correctly.
</source>
<target>Files and folders deleted on the source side are also deleted on the target side after synchronization. You should perform complete synchronization at least once to make this option work correctly.
</target>
</trans-unit>
<trans-unit id="check_overwrite_files">
<source>Propagate modifications</source>
<target>Propagate modifications</target>
</trans-unit>
<trans-unit id="hint_check_overwrite_files">
<source>Files and folders modified on the source side are overwritten on the target side after synchronization.
</source>
<target>Files and folders modified on the source side are overwritten on the target side after synchronization.
<source>&Include in Synchronization "<x id="1"/>" files</source>
<target>&Include in Synchronization "<x id="1"/>" files</target>
</trans-unit>
<trans-unit id="menu_Accept Algorithm Decision">
<source>Accept Algorithm Decision for</source>
<target>Accept Algorithm Decision for</target>
</trans-unit>
<trans-unit id="menu_All in This Folder">
<source>All in This Folder</source>
<target>All in This Folder</target>
</trans-unit>
<trans-unit id="menu_AllXFiles">
<source>All <x id="1"/> Files</source>
<target>All <x id="1"/> Files</target>
</trans-unit>
<trans-unit id="menu_Set Correct File">
<source>Set Correct File</source>
<target>Set Correct File</target>
</trans-unit>
<trans-unit id="menu_OnX">
<source>On <x id="1"/> for</source>
<target>On <x id="1"/> for</target>
</trans-unit>
<trans-unit id="menu_Set Do Not Change">
<source>Set Do Not Change for</source>
<target>Set Do Not Change for</target>
</trans-unit>
<trans-unit id="menu_Set Remove">
<source>Set Remove for</source>
<target>Set Remove for</target>
</trans-unit>
<trans-unit id="menu_Set Attributes">
<source>Set Attributes for</source>
<target>Set Attributes for</target>
</trans-unit>
<trans-unit id="menu_Set Attribute">
<source>Set Attribute for</source>
<target>Set Attribute for</target>
</trans-unit>
<trans-unit id="menu_Update File Time">
<source>Update File Time for</source>
<target>Update File Time for</target>
</trans-unit>
<trans-unit id="rename_association_prompt">
<source>Enter new name for the job:</source>
<target>Enter new name for the job:</target>
</trans-unit>
<trans-unit id="vercheck_retrieving">
<source>Retrieving information about the latest version from synchronizer home page...</source>
<target>Retrieving information about the latest version from synchronizer home page...</target>
</trans-unit>
<trans-unit id="vercheck_connection">
<source>(Please make sure you are connected to the Internet)</source>
<target>(Please make sure you are connected to the Internet)</target>
</trans-unit>
<trans-unit id="vercheck_failedmsg">
<source>
Failed to connect to the web server.
Please make sure you are connected to the Internet and try again.
Internet Explorer must be properly configured for Internet access.
</source>
<target>
Failed to connect to the web server.
Please make sure you are connected to the Internet and try again.
Internet Explorer must be properly configured for Internet access.
</target>
</trans-unit>
<trans-unit id="activate_caption">
<source>Choose <x id="1"/> Pro Activation Method</source>
<target>Choose <x id="1"/> Pro Activation Method</target>
</trans-unit>
<trans-unit id="activate_online_prompt">
<source>Use the instant, on-line activation method if you have an Internet connection on this computer and you don't have an activation key.</source>
<target>Use the instant, on-line activation method if you have an Internet connection on this computer and you don't have an activation key.</target>
</trans-unit>
<trans-unit id="activate_offline_prompt">
<source>Otherwise, use the off-line activation method.
Note: obtaining an activation key off-line may take up to 48 hours.</source>
<target>Otherwise, use the off-line activation method.
Note: obtaining an activation key off-line may take up to 48 hours.</target>
</trans-unit>
<trans-unit id="activate_online_button">
<source>Activate On-line</source>
<target>Activate On-line</target>
</trans-unit>
<trans-unit id="activate_offline_button">
<source>Activate Off-line</source>
<target>Activate Off-line</target>
</trans-unit>
<trans-unit id="activate_off_caption">
<source>Off-line <x id="1"/> Pro Activation</source>
<target>Off-line <x id="1"/> Pro Activation</target>
</trans-unit>
<trans-unit id="activate_off_prompt">
<source>Enter activation key here</source>
<target>Enter activation key here</target>
</trans-unit>
<trans-unit id="activate_no_code">
<source>If you have not obtained a Pro license yet, please use the link below:</source>
<target>If you have not obtained a Pro license yet, please use the link below:</target>
</trans-unit>
<trans-unit id="activate_send">
<source>If you have purchased a Pro license and want to activate it off-line:</source>
<target>If you have purchased a Pro license and want to activate it off-line:</target>
</trans-unit>
<trans-unit id="activate_send1">
<source>Contact us using any method described on <x id="1"/> (we recommend the Ticket Support System option)</source>
<target>Contact us using any method described on <x id="1"/> (we recommend the Ticket Support System option)</target>
</trans-unit>
<trans-unit id="activate_send1i1">
<source>our web site</source>
<target>our web site</target>
</trans-unit>
<trans-unit id="activate_send2">
<source>Provide your name plus either the Order ID or the E-mail address used when you purchased the Pro license</source>
<target>Provide your name plus either the Order ID or the E-mail address used when you purchased the Pro license</target>
</trans-unit>
<trans-unit id="activate_send3">
<source>Tell us the Hardware ID of THE COMPUTER YOU WANT TO ACTIVATE THE SOFTWARE ON (copy this value from the field below)</source>
<target>Tell us the Hardware ID of THE COMPUTER YOU WANT TO ACTIVATE THE SOFTWARE ON (copy this value from the field below)</target>
</trans-unit>
<trans-unit id="activate_send4">
<source>You should receive the activation key within 48 hours.</source>
<target>You should receive the activation key within 48 hours.</target>
</trans-unit>
<trans-unit id="activate_send5">
<source>Enter the activation key you received in the box above.</source>
<target>Enter the activation key you received in the box above.</target>
</trans-unit>
<trans-unit id="activate_send6">
<source>Contact us via the Ticket Support System if you have not received any response within 48 hours.</source>
<target>Contact us via the Ticket Support System if you have not received any response within 48 hours.</target>
</trans-unit>
<trans-unit id="activate_hwid_prompt">
<source>Computer Hardware ID</source>
<target>Computer Hardware ID</target>
</trans-unit>
<trans-unit id="activate_success">
<source>Pro version has been successfully activated!</source>
<target>Pro version has been successfully activated!</target>
</trans-unit>
<trans-unit id="activate_failed">
<source>Activation error! Please check the license activation key code you entered.</source>
<target>Activation error! Please check the license activation key code you entered.</target>
</trans-unit>
<trans-unit id="activate_failed_hwid">
<source>Activation error! The license activation key is correct, but the Computer Hardware ID does not match.
Please obtain a separate license activation key for this computer.</source>
<target>Activation error! The license activation key is correct, but the Computer Hardware ID does not match.
Please obtain a separate license activation key for this computer.</target>
</trans-unit>
<trans-unit id="activate_failed_comp">
<source>
The entered key is not valid for this computer. To obtain a key for
your computer please contact the software vendor.
</source>
<target>
The entered key is not valid for this computer. To obtain a key for
your computer please contact the software vendor.
</target>
</trans-unit>
<trans-unit id="activate_button">
<source>Activate</source>
<target>Activate</target>
</trans-unit>
<trans-unit id="window_about">
<source>About</source>
<target>About</target>
</trans-unit>
<trans-unit id="window_options">
<source>Options</source>
<target>Options</target>
</trans-unit>
<trans-unit id="window_statistics">
<source>Statistics</source>
<target>Statistics</target>
</trans-unit>
<trans-unit id="window_activate">
<source>Activate Pro</source>
<target>Activate Pro</target>
</trans-unit>
<trans-unit id="empty_tree_name">
<source>[empty sync folder]</source>
<target>[empty sync folder]</target>
</trans-unit>
<trans-unit id="exit_by_synchronization_message">
<source>Some jobs are still active. Do you want to interrupt the synchronization process?</source>
<target>Some jobs are still active. Do you want to interrupt the synchronization process?</target>
</trans-unit>
<trans-unit id="remove_job_message">
<source>Do you really want to delete job "<x id="1"/>"?</source>
<target>Do you really want to delete job "<x id="1"/>"?</target>
</trans-unit>
<trans-unit id="import_job_message">
<source>Current job will be overwritten. Do you want to continue?</source>
<target>Current job will be overwritten. Do you want to continue?</target>
</trans-unit>
<trans-unit id="out_of_range_time">
<source>The time is out of range</source>
<target>The time is out of range</target>
</trans-unit>
<trans-unit id="dlg_logout_caption">
<source>Sync on logout</source>
<target>Sync on logout</target>
</trans-unit>
<trans-unit id="dlg_logout_text">
<source>Synchronization activated by "before log out" option is in progress. Please wait till the application exits automatically when synchronization is done.</source>
<target>Synchronization activated by "before log out" option is in progress. Please wait till the application exits automatically when synchronization is done.</target>
